Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Lakeland Homeowners
A cracked crown, a rusted cap, or a liner that’s given up doesn’t fix itself, and in a wood-burning home it’s a safety problem before it’s a comfort problem. Our technicians have up to 8 years of experience with chimney repair in Lakeland, and we work only on chimneys, so every tool and every material we bring is chosen for this trade. We can often handle a repair the same day you call. Call (844) 410-7138. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Cap Installation
Chimney Cap Installation is the fitting of a cover over the flue that keeps rain, animals, and debris out while letting smoke escape. You need it when a flue is open to the sky, when birds and squirrels are getting in, or when sparks are landing on a roof that’s been dry for weeks. Lakeland’s summer storms push water straight down an uncapped flue, and that water works on the liner and the firebox over time. We fit caps sized to your flue and secure them against wind. Typical cost runs $180 to $450 depending on flue count and cap style, set by the written estimate.
Stainless Caps and Mesh Screens
A stainless cap holds up to sun and driven rain far better than painted steel. The mesh screen matters as much as the cap: the right opening keeps out animals while staying clear of soot. We size both to the flue rather than trimming a universal cap to fit.
Choosing a Cap for Your Flue
Single-flue caps, multi-flue caps, and caps built for gas appliances are different products with different venting needs. A cap that’s too tight on a gas flue can affect how the appliance drafts. We check what you’re burning before recommending a style.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Replacement
Chimney Cap Replacement is the removal of a failed cap and the fitting of a new one, and it’s due when the old cap is rusted through, bent, or missing its screen. A cap that’s lost its mesh no longer keeps animals out, and a cap that’s rusted solid can’t be repaired back to working condition. We carry caps in trade-grade materials and match the replacement to the flue size and the appliance it serves. Replacement typically runs $150 to $400 installed, confirmed by the written estimate before we begin. If the cap is only loose or the screen is torn, we’ll tell you that instead of selling a full replacement.
When a Repair Is Enough
Loose fasteners, a slipped cap, or a torn screen can often be corrected without a new cap. We check the body and the mounting before deciding. If the cap comes off cleanly and the metal is sound, a repair is the honest call.
Replacing Caps on Multi-Flue Chimneys
A chimney with two or three flues needs a cap that spans them and vents each one properly. We measure the full crown footprint, not just one flue. That way the new cap sits level and sheds water away from the masonry.
Chimney Liner Installation
Chimney Liner Installation is the fitting of a new flue liner inside the existing chimney, and it’s needed when the old clay tile is cracked, spalled, or missing, or when a new appliance requires a liner it doesn’t have. A damaged liner lets heat and carbon monoxide reach the structure of the house, which is why we treat it as a safety repair rather than an upgrade. We install DuraFlex flexible liner systems, the professional-grade standard for relining, sized to the appliance and the flue. Installation typically runs $2,400 to $6,500 depending on height and flue count, set by the written estimate. Nothing is recommended without camera evidence you can see for yourself.
Relining With DuraFlex
DuraFlex systems are built for chimneys that need a continuous, sealed liner rather than patched tile. We size the liner to the appliance’s venting requirements and insulate where the installation calls for it. The result is a flue that drafts correctly and contains what it should.
Restoring a Liner With HeatShield
Not every damaged liner needs full replacement. HeatShield ceramic resurfacing restores and extends liner life where the damage is within its scope, and it’s a proven alternative to full relining. We inspect first and use it only where it fits the condition of the flue.
Chimney Flashing Repair
Chimney Flashing Repair is the correction of the metal that seals the joint between the chimney and the roof, and it’s needed whenever that seal has opened up. Flashing is where most roof leaks around a chimney begin: the metal pulls away, the sealant dries out, or the step flashing was never woven into the shingles correctly. We reset, reseal, or replace flashing so water runs off the roof instead of down the chimney. Most flashing repairs in Lakeland run $250 to $850 depending on roof pitch and the extent of the work, set by the written estimate. We check the attic side where we can, because a leak that started months ago leaves a mark.
Locating the Leak Source
Water on the ceiling doesn’t always come from the flashing, and it doesn’t always come from the chimney. We look at the flashing, the crown, and the roof around it before blaming one part. Guessing at a leak is how homeowners end up paying twice.
Metal Choices and Sealing Methods
We use flashing materials suited to Florida sun and driven rain rather than a bead of caulk over failed metal. Step flashing, counter-flashing, and the seal at the chimney shoulder each need their own approach. The joint has to move with the roof and still stay closed.
Chimney Crown Repair
Chimney Crown Repair is the fixing or rebuilding of the concrete cap at the top of the chimney, and it’s needed when the crown is cracked, crumbling, or sloping water toward the flue instead of away from it. A failing crown lets rainwater into the masonry below, and that damage shows up later as spalling brick or a rusted damper. We repair minor cracks, rebuild damaged crowns, and shape the new surface so it sheds water clear of the flue. Crown work typically runs $350 to $1,200 depending on size and whether the crown is patched or rebuilt, set by the written estimate.
Cracked and Spalling Crowns
Hairline cracks on their own don’t always demand a rebuild, but cracks that have widened or let water through do. We check the crown’s slope and the bond at the edge of the chimney. Once the concrete is crumbling, patching it back rarely holds.
Rebuilding the Crown Correctly
A rebuilt crown needs the right slope, a proper overhang, and a bond break at the flue so the two can move independently. We form it rather than trowel on a thin layer. That’s what keeps the next leak from starting at the same seam.
Chimney Repair Companies
Chimney Repair Companies vary widely in what they actually do, and that matters when you’re deciding who to call. Some are general handyman operations that add chimneys to a long list, and some are HVAC shops with a sweep on the side; others, like us, work only on chimneys. You need a chimney specialist when the work involves the liner, the crown, the flashing, or masonry, because those repairs fail when they’re done with generic materials and guesswork. We handle sweep, inspection, and repair under one provider, sourcing from Olympia Chimney and other trade-level suppliers. Repair work runs from $150 for a cap up to $6,500 for a full reline, set by the written estimate.
What Separates a Specialist
A chimney-only specialist carries the tools and the products for one trade and nothing else. That means the liner system, the resurfacing material, and the masonry method are all chosen from professional lines. There’s no adapting a generalist’s toolkit to a job it wasn’t built for.
Questions to Ask Before Booking
Ask whether the company installs a named liner system or cuts a generic one to size, and ask for camera evidence before any repair is recommended. Ask whether the estimate is written and per job. A specialist answers all three without hesitation.
Chimney Masonry Repair
Chimney Masonry Repair is the restoration of the brick, mortar joints, and structure of the chimney itself, and it’s needed when mortar is washing out, bricks are spalling, or the chimney is leaning away from the house. In Lakeland the combination of humid summers and heavy rain works on mortar joints year after year, and a joint that’s receded lets water into the wall behind it. We repoint joints, replace damaged bricks, and address the structure where it’s moved. Masonry repairs typically run $400 to $2,500 depending on the extent, set by the written estimate. We tell you plainly when a repair can safely wait.
Repointing Mortar Joints
Repointing means grinding out failed mortar and packing new mortar into the joint to the right depth. Done properly it lasts; smeared over the surface it fails within a season. We match the mortar to the brick, not the other way around.
Spalling Brick and Structural Movement
Bricks that are flaking or crumbling have absorbed water and are failing from the inside. A chimney that’s pulling away from the house needs more than cosmetic work. We look at the cause before quoting the fix.
Brands We Service
We install DuraFlex flexible liner systems because the liner is the part of the chimney that has to hold up to heat and time, and a professional-grade system is built for that. We know where a DuraFlex installation tends to need extra attention at the top plate and the appliance connection. We also apply HeatShield ceramic resurfacing, which restores and extends liner life where full replacement isn’t necessary.
Our materials come through Olympia Chimney, Gelco, Famco, and Copperfield, trade-level suppliers that general handymen don’t buy from. That access is part of what keeps a repair from turning into a workaround, and whether you have DuraFlex, HeatShield, Olympia Chimney, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Water stains on the ceiling or chimney breast. A dark ring near the chimney usually means the flashing, crown, or cap has failed. Left alone, that water reaches framing and insulation.
- Crumbling mortar or flaking brick. When you can scrape mortar out of a joint with a screwdriver, it’s past the point where a coat of sealant helps. Masonry repair is cheaper before bricks start coming loose.
- A strong creosote smell or smoke backing into the room. Smoke that won’t go up the flue points to a blockage or a drafting problem. It also means the flue needs to be looked at before the next fire.
- A loose or missing chimney cap. An open flue invites rain and animals, and both cause damage that shows up later. A cap is one of the least expensive repairs on a chimney.
- Visible cracks in the crown or liner. Cracks in the crown let water in, and cracks in the liner let heat and carbon monoxide reach the structure. Both need a professional’s eyes, not a patch from a tube.
Our Process, Step by Step
- 1
Book the visit. We schedule the sweep and inspection together so the repair decision is based on what’s actually there. Call (844) 410-7138 and we’ll find a time that works.
- 2
Sweep and camera inspection. We clean the flue and run a camera down it, so we see the liner, the smoke chamber, and the joints rather than guessing from the firebox. You see the footage too.
- 3
Written findings and a flat price. We put the findings in writing with photos and the repair price for each item, then let you decide. Nothing is recommended without camera evidence you can see for yourself.
- 4
Repair with named materials. When you approve, we do the work with professional-grade products: DuraFlex for relining, HeatShield for resurfacing, and Olympia Chimney or Copperfield components where the job calls for them.
- 5
Final check and photo report. We verify the repair and leave you with a photo report of the finished work. If something can safely wait until next season, we say so.
How Much Does Chimney Repair Cost in Lakeland?
Chimney repair in Lakeland generally runs from about $150 for a cap replacement up to $6,500 for a full reline, and the written estimate you get after inspection sets the final price. A typical cap installation runs $180 to $450 depending on flue count and style. A typical crown repair runs $350 to $1,200 depending on whether it’s patched or rebuilt. Flashing repair typically runs $250 to $850, and masonry repairs run $400 to $2,500 depending on how many joints and bricks are involved. Liner work is the largest item: a typical DuraFlex relining project runs $2,400 to $6,500 depending on chimney height, flue count, and whether the liner needs insulation.
Several things move the number. Access matters on a steep or tall roof. Multiple flues add work at the crown and the cap. The condition of the masonry behind a failed liner changes the scope. And the appliance you burn with sets the liner specification, because a wood stove and a gas insert don’t vent the same way.
To avoid overpaying, ask for the findings in writing with photos and get a per-repair price rather than a lump sum. A free estimate from us includes the camera inspection and a photo report, and we’ll tell you when a repair can wait. Call (844) 410-7138 for an exact quote; estimates are free.
Our Service Area Near Lakeland
We work across Lakeland and the surrounding Polk County communities, including Combee Settlement, Crystal Lake, Fussels Corner, Highland City, Jan Phyl Village, Auburndale, Mulberry, Inwood, Polk City, Eagle Lake, and Winter Haven. If you’re near Combee Settlement or Crystal Lake, our teams handle chimney repair in those neighborhoods as well. For the wider area, see our chimney repair coverage near Crystal Lake, or read about our full chimney repair service. Book ahead so the visit fits your week.
Serving Lakeland, FL – Our Local Coverage Area
We serve Lakeland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Repair in Lakeland
Chimney repair is the correction of damage to the parts of a chimney that contain fire and keep water out: the liner, the crown, the cap, the flashing, and the masonry. It covers everything from a cracked crown to a full liner replacement, depending on what the inspection finds. We handle all of it under one provider, along with the sweep and inspection that come before. Call (844) 410-7138 to book an inspection.
Most repairs take a few hours to a single day, while a full reline can run one to two days depending on chimney height and access. Cap and flashing work is typically finished the same visit. Masonry repairs take longer when joints need grinding out and brick needs to cure. We give you a time frame with the written estimate.
Chimney repair in Lakeland typically ranges from $150 to $6,500 depending on the repair, with most common fixes landing between $250 and $1,200. Caps, crowns, and flashing sit at the lower end; liners and extensive masonry sit at the higher end. The written estimate sets the final price after inspection. Call (844) 410-7138 for an exact quote; estimates are free.
Yes, we install and service DuraFlex flexible liner systems and components from Olympia Chimney, along with HeatShield ceramic resurfacing where it fits the job. We use these professional-grade lines because a repair that relies on generic materials fails sooner, and we’d rather not come back to fix it. If you’re unsure what’s in your chimney, the camera inspection tells us.
We can often handle a repair the same day you call, and we book it based on the day’s schedule. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Our repair work is backed by a satisfaction guarantee, and the coverage that applies to your job is stated in the written estimate before we start. What’s covered depends on the repair itself, which is why we put it in writing rather than in a verbal promise. Ask us to walk through it when we give you the estimate. Call (844) 410-7138 with any questions.
Clear the hearth and the floor in front of the fireplace, move anything breakable away from the chimney, and make sure we can get to the roof safely. If you have a gas appliance, note the pilot status so we know it’s in service. Tell us about any leaks you’ve seen, even small ones, because they help us find the source faster.
Schedule Your Chimney Repair Service in Lakeland Today
Chimney damage gets worse with every storm and every fire, and the fix is cheaper before water reaches the framing. Call (844) 410-7138 for a free estimate and a camera inspection you can see for yourself. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. As a Lakeland Chimney Cleaning team that works on chimneys and nothing else, we’ll tell you plainly what needs fixing and what can safely wait.
Written by the team at Lakeland Chimney Cleaning.