Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Inwood
If you live in Inwood, you already know the weather here doesn’t behave like the coast. Inland nights off US-17 drop below freezing a few times each winter, and those hard swings put real stress on the masonry chimneys in this town. We’re a chimney-only specialist, which means every sweep, inspection, and repair we schedule for Inwood is handled by someone who works on flues and nothing else. When you call, tell us where you are: fast dispatch from 7am to 7pm, Sunday through Friday, and our phone line is answered 24/7 at (844) 410-7138. A sweep is booked, not guessed, and you’ll get a written estimate before any work starts.
Why Inwood Homeowners Call Lakeland Chimney Cleaning for Chimney Sweep
Inwood sits far enough from the Gulf that its chimneys see a stress pattern the beach towns don’t. Hard freezes after warm spells crack masonry crowns and shear mortar at the flue-tile joints, especially in the 1970s – 1990s ranch and concrete-block homes that make up most of the housing here. Local technicians recommend a pre-winter Level 2 inspection and a stainless liner for exactly that reason – the occasional sweep that mild-winter Florida chimneys get by with isn’t enough when the freeze-thaw cycle is doing structural work.
Our technicians have up to 8 years of experience, and that experience is all chimney work: no HVAC side jobs, no general handyman calls. We use DuraFlex liner systems and HeatShield ceramic resurfacing rather than unbranded materials from a big-box shelf, and we source components from Olympia Chimney and Copperfield. If you’re searching for a chimney sweep, that narrow focus is worth asking about. A generalist who sweeps on the side is unlikely to catch a loosened flue tile until it’s already letting water in.
Response across Inwood is straightforward. We book a sweep and arrive within the dispatch window, and if you’re near the older tract homes off US-17, we know the building style before we pull in. Estimates are free, and you’ll see the price in writing before we touch the flue.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Sweep Services in Inwood
Chimney Sweep Services in Inwood cover the full clean-and-check cycle your fireplace needs, whether you burn wood or run a gas insert. A typical sweep and Level 1 inspection here runs $180 – $340, and a Level 2 inspection with a camera scope runs $300 – $550. The job removes soot and creosote, checks the damper and smoke chamber, and gives you a photo report of what’s inside the flue. Inwood homes need this most before the first cold snap, when the chimney has sat unused through a humid summer.
The sweep and what it removes
We brush the flue and clear first- and second-degree creosote from the walls, then vacuum the firebox and hearth so nothing drifts into the room. Third-degree creosote – the glazed, hardened layer – needs chemical treatment before brushing, and we’ll tell you honestly if that’s the case.

Camera inspection and photo report
A scope run down the flue shows cracked tiles, gaps at the joints, and any debris that’s fallen in. You see the photos before we recommend anything. Nothing gets sold to you that the camera can’t show.

Chimney Cleaning in Inwood
Chimney Cleaning in Inwood runs $150 – $300 for a standard sweep, and it’s the maintenance most Inwood homeowners skip until they notice a problem. The humid summers here promote creosote buildup and moisture damage faster than a dry climate would. Cleaning also clears the soot and ash that a gas insert leaves behind, which many people don’t realize needs attention the same way wood-burning flues do. If you’ve noticed a smoky smell on warm days, that’s a sign the flue is overdue.
Creosote and soot removal
Creosote is the leading cause of chimney fires, and it builds up in layers that get harder to remove the longer they sit. Soot from a gas insert is finer but still coats the flue and the smoke chamber.
When annual cleaning is enough
If your flue is clean, your cap is intact, and the crown shows no cracks, an annual cleaning plus a Level 1 inspection is sufficient. We’ll say so plainly and not push more than the chimney needs.
Trusted Brands We Service in Inwood
We work with the professional-grade brands the trade relies on: DuraFlex flexible liner systems, HeatShield ceramic resurfacing, Olympia Chimney, Copperfield, Gelco, and Famco. These come through trade-level suppliers, not consumer retailers, which matters when a liner has to fit an original clay flue in a 1970s Inwood ranch home. We don’t stock parts or claim to have a warehouse of components – we order what the job calls for and install it to the manufacturer’s spec. Turnaround stays fast because we’re dealing with known brands and known fit. DuraFlex liners are the professional standard for relining, and HeatShield restores a damaged liner without full replacement when the flue is a candidate.
Common Chimney Sweep Problems We See in Inwood Homes
- Cracked crowns and spalling masonry. Repeated inland freeze-thaw cycles stress the crown and the exterior block, and spalling shows up as flaking faces on the chimney. A cracked crown lets water straight into the flue.
- Original clay flue tiles at end of life. Many Inwood homes still have the factory clay tiles, loosened at the joints and admitting moisture after decades of thermal cycling. A scope shows the gaps clearly.
- Corroded galvanised caps and flashing. Humid Central Florida summers eat galvanised steel, and the corrosion lets rain into the smoke chamber and firebox. A stainless cap and fresh flashing end the leak.
- End-of-life prefab inserts. Prefab inserts original to 1980s Inwood homes often have failed gaskets and rusted components. Cleaning is worth it if the unit passes inspection; replacement is the honest answer if it doesn’t.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Sweep in Inwood, FL
A standard sweep and Level 1 inspection in Inwood typically costs $180 – $340. A Level 2 inspection with a camera scope runs $300 – $550. Creosote removal climbs toward the top of the sweep range when the buildup is heavy or glazed. Crown repair and repointing fall in the $400 – $900 range, and a DuraFlex stainless reline runs $2,500 – $5,000 depending on flue length and configuration. What moves the number: how much creosote is present, whether the flue tiles are intact, and whether the crown and cap need work at the same time. The written estimate sets the final price, and the estimate itself is free. Call (844) 410-7138 for an exact quote.
We Also Serve Cities Near Inwood
We serve homeowners throughout Inwood and the surrounding towns, including Winter Haven, Lake Alfred, Jan Phyl Village, and Eagle Lake. The freeze-thaw pattern that cracks Inwood crowns shows up across this inland stretch, so the recommendations are similar. If you’re just outside Inwood, call and we’ll confirm coverage. Call (844) 410-7138. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Inwood, FL – Our Local Coverage Area
We serve Inwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Inwood
Once a year, and for Inwood specifically, before the first freeze. The inland freeze-thaw cycle here cracks crowns and loosens flue tiles, so a pre-winter Level 2 inspection catches damage before the cold makes it worse. An annual sweep plus a Level 1 inspection covers the years in between. Call (844) 410-7138 for an exact quote – estimates are free.
Because water soaked into the crown mortar froze overnight and expanded, then thawed and contracted in a pattern Inwood sees most winters. That freeze-thaw stress cracks the crown and, over time, shears mortar at the flue-tile joints. A cracked crown needs repair before the next rain gets into the flue. Call (844) 410-7138 to book an inspection.
Yes, if the galvanised cap is showing rust or corrosion. Humid Central Florida summers corrode galvanised steel faster than stainless, and a failing cap lets water into the smoke chamber and firebox. A stainless cap lasts far longer under that exposure. Call (844) 410-7138 for an exact quote.
First-degree creosote is light soot that brushes off easily, second-degree is a flaky layer that needs a stiff brush, and third-degree is glazed and hardened and needs chemical treatment before brushing. Most Inwood sweeps are first or second degree; third-degree is where the cost and the fire risk both rise. Call (844) 410-7138 and we’ll tell you what you’re dealing with.
It’s worth cleaning only if the unit passes inspection; if gaskets and components have failed, replacement is the honest answer. Cleaning a failed insert just restores a unit that still won’t draft correctly. We inspect, show you what we find, and tell you plainly whether cleaning or replacement makes sense. Call (844) 410-7138 for an exact quote.
Book Your Chimney Sweep in Inwood
If your Inwood home hasn’t had its chimney looked at since last winter, now is the time to book. We’ll sweep the flue, scope it, and show you photos of anything that needs repair – nothing recommended without evidence you can see for yourself. Call (844) 410-7138 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Lakeland Chimney Cleaning.