Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Dundee
If your chimney is leaking, smoking, or has a crown that’s cracked into pieces, we can help. We handle chimney repair across Dundee, from the older block homes near the old town center to the ranch and manufactured homes spread out along the rural parcels toward Cypress Gardens and Haines City. We know this town’s housing mix, and we know that a lot of the “chimneys” here are actually factory-built metal flues and prefab fireplaces, which need different parts and different methods than a masonry stack. Call (844) 410-7138 to set up a free estimate. We answer 24/7.
Why Dundee Homeowners Call Lakeland Chimney Cleaning for Chimney Repair
Dundee sits in Polk County’s lake country, and the homes here don’t look much like the ones in bigger metro markets. That matters for repair work. A manufactured home with a prefab fireplace insert needs a technician who knows the flue components and can track down compatible parts. An older block house near the old town center might have a capped masonry flue that hasn’t been touched in years. We treat both as legitimate chimney work, because for us every job on the books is a chimney job. No side work, no generalist compromises.
We’re a chimney specialist, not a handyman outfit that sweeps on the side. That focus is why Dundee homeowners call us when a repair gets complicated: we use trade-level materials from Olympia Chimney, Gelco, Famco, and Copperfield, the same supply lines the trade relies on, and those parts often aren’t available through national franchises that don’t stock manufactured-home flue components. You’ll get a technician with up to 8 years of experience on the trade, a camera inspection with photos you can review, and a written estimate before any work begins.
Our service area for this page centers on the Dundee and greater Polk County area, and we reach the rural and lakefront parcels around town along with the closer-in streets near the old town center. Call (844) 410-7138 and we’ll get your repair on the schedule.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Crown Repair in Dundee
Chimney Crown Repair is one of the most common jobs we handle in Dundee, especially on the small 1950s-era block homes near the old town center where the crown has had decades of humid summers and storm-driven rain working on it. The crown is the concrete cap on top of a masonry chimney, sloped to shed water. When it cracks or spalls, water gets into the stack and starts rusting the damper and firebox below. We rebuild crowns with proper slope and bonding, and we don’t recommend repair without showing you what the camera and the visual inspection found. Typical cost in Dundee runs $350 to $900 depending on the crown’s size and how much of the masonry cap has to be cut back and replaced. The written estimate sets the final price.
Reading the cracks
A hairline crack in a crown is common and can often be sealed during a routine sweep visit. A crack wide enough to catch a fingernail, or one that runs all the way to the flue liner, is the kind that lets water in. If you can see spalling chunks on the roof, it’s time to have it looked at.
Why crowns fail faster here
Dundee’s humid summers and afternoon storms push water against the crown and flashing for months at a time. Freeze damage isn’t a factor in central Florida. Moisture and sun are. That’s why a crown poured for a colder climate’s occasional rain doesn’t hold up the same way here.
Chimney Repair Companies in Dundee
Choosing among Chimney Repair Companies in Dundee comes down to one question: will they show you evidence before recommending work? Dundee’s housing stock is where the industry’s worst upselling happens. A homeowner with a prefab metal flue can be told they need a full reline when the real problem is a rusted-out cap and water-damaged flue sections. A homeowner with an older masonry stack can be told the whole chimney needs rebuilding when repointing and a HeatShield ceramic resurfacing would solve it. We use a Level 2 camera inspection on every repair job, and we hand you the photos. Typical chimney repair in Dundee runs $250 to $1,800 for most jobs, with full relining or rebuilding priced separately. The written estimate sets the final price, and the estimate is free.
Repair versus replacement
Most prefab metal chimneys with rusted components can be repaired rather than fully replaced if the flue sections are still sound above the damage. We replace the damaged sections with DuraFlex or Olympia Chimney components matched to the existing system.
What we’re not
We’re chimney-only. Because of that, we don’t try to sell you roofing, HVAC work, or general handyman services on the same visit. Our focus stays on the flue, the crown, the flashing, and the firebox.
Trusted Brands We Service in Dundee
We work with recognized professional brands because the parts matter. DuraFlex flexible liner systems are our standard for relining projects, and HeatShield ceramic resurfacing is what we use when a liner needs repair rather than full replacement. When a Dundee prefab system needs a cap or flue section, we source from Olympia Chimney, Gelco, and Copperfield. These are trade-level supply brands, not products you’ll find in a big-box store aisle. We don’t claim to stock parts locally; what we do is source the right component in a reasonable turnaround, and we tell you the exact part and brand before we order it. If a compatible part isn’t available, we say so. No substitution with a generic component.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Dundee Homes
- Cracked or spalling chimney crowns on 1950s block homes. Many of the older block houses near the old town center have original crowns that have spalled from decades of humid summers. Water intrusion through a failed crown is what rusts out the damper and firebox below.
- Rusted-out caps and flashing on prefab metal flues. Manufactured homes with prefab fireplaces are especially prone to this after stormy summer seasons. Leaks around the cap and flashing show up as ceiling stains and draft problems the next time the fireplace is lit.
- Third-degree creosote glaze in wood-stove flues. Homeowners in Dundee’s rural and lakefront parcels often burn cut oak and citrus wood, which builds heavy creosote. Third-degree glaze is the hard, tar-like stage that requires camera verification before any repair recommendation, since the flue can look clean from the firebox but be heavily coated above the smoke chamber.
- Bird and wasp nests in flues after the long off-season. Central Florida’s mild winters mean fireplaces sit unused for months, giving wildlife time to build in the flue. A camera inspection during a sweep catches nests, rusted caps, and other blockages before they become a hazard on the first cold snap.
Pricing for Chimney Repair in Dundee, FL
We give real ranges because we don’t want you guessing. Chimney crown repair in Dundee typically runs $350 to $900. Mortar repointing and tuckpointing run $300 to $800 depending on how much of the joint needs attention. Flashing repair runs $250 to $600. Chimney waterproofing runs $300 to $700 for a typical masonry stack. HeatShield ceramic resurfacing for a damaged liner runs $800 to $1,800. Full rebuilding is a larger job and priced after inspection. What moves the number: the chimney’s height, how much of the crown or cap needs replacing, whether the flue is masonry or metal, and how much water damage has already happened. Every price comes from a written estimate after a camera inspection, and the estimate is free. Call (844) 410-7138 to book yours. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
We Also Serve Cities Near Dundee
We also work in the towns around Dundee – Haines City, Cypress Gardens, Winter Haven, and Wahneta. If your chimney is on the line between Dundee and one of these communities, the same inspection and repair process applies, and the pricing ranges above hold for the broader Polk County area. Use our chimney repair page to see the full method we follow on crown repair, flashing repair, and relining before you book.
Serving Dundee, FL – Our Local Coverage Area
We serve Dundee and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Dundee
Rusted prefab metal chimneys often can be repaired rather than fully replaced. The key question is how far the rust extends into the flue sections themselves. A camera inspection shows whether the damage is confined to the cap and flashing or has reached the flue walls. For most Dundee manufactured homes, we replace the rusted components with compatible parts from brands like DuraFlex or Olympia Chimney. Call (844) 410-7138 for a free estimate – we’ll show you the camera findings first.
Look for visible cracks wider than a hairline, spalling chunks on the roof, or water stains inside the firebox. Dundee’s humid, stormy summers push moisture against the crown for months, so even a small crack can lead to damper and firebox rust within a season or two. If you’ve seen any of these signs, have it inspected. The repair is far cheaper than the masonry damage that follows a failed crown. Call (844) 410-7138 and we’ll take a look.
Creosote builds in three stages: first-degree is light flaky soot that sweeps away easily, second-degree is a harder crust, and third-degree is a tar-like glaze that’s baked onto the flue. Third-degree glaze is what causes chimney fires, and it’s more common in Dundee than in neighboring cities because of the oak and citrus wood many homeowners burn. It cannot be brushed off – it has to be verified by camera and treated properly before any repair recommendation. Call (844) 410-7138 and we’ll inspect the flue with a camera before suggesting anything.
Book a Level 2 inspection before lighting that first fire. Older masonry stacks near Dundee’s old town center often have clay-tile flues that were never lined, plus a capped top and years of accumulated debris. A camera inspection will tell you whether the flue is intact, whether the crown and flashing hold water out, and whether the firebox is still safe to use. It’s the only way to know before you burn. Call (844) 410-7138 for a free estimate on the inspection.
Cameras are how we avoid recommending work you don’t need. Without a camera, a technician can’t see the upper flue, the smoke chamber, or the crown from the firebox – and that’s exactly where third-degree creosote, cracked liners, and nest blockages hide. Our inspections come with a photo report you can review for yourself, and nothing gets recommended unless the camera shows it. If your flue is in good shape, we say so. Call (844) 410-7138 to schedule an inspection.
Written by the team at Lakeland Chimney Cleaning.